No.


Catalog: Main > Main Wheels & Brake Assemblies > Internal Caliper Centrifugally Cast
This product also appears in: Main Wheels & Brake Assemblies

WHLWi600SS 6.00-6, 1.50 bearing, Single I Series Caliper Deep Bore

Single Caliper I Series

Product Options

Price: $513.61



Product Description

MATCO mfg produces a superior 6 inch wheel and brake assembly for use with aircraft requiring less than 1860 lbs per wheel. This model uses 1.50 inch tapered roller bearings. (Check the product comparison table for other bearing and caliper configurations).

DIMENSIONS - The WHLWi600SS is a 6 inch wheel with 6.15 inch width with an additional 1.25 inch caliper spacing. Bearing spacing is 3.35 inches and axle spacing is 1.61 inches. The total weight of this wheel and brake assembly is under 10 pounds. The bearing axle diameter is 1.50 inches.

FEATURES - The Wi600S is centrifugally cast utilizing 535 aluminum alloy for superior strength and corrosion resistance. This alloy provides a light weight wheel and affords many years of efficient performance. The Wi600SS features the WHLBi5 brake assembly and WHLD2S disc.  The WHLBi5 brake uses a 1.50 inch diameter piston in a single caliper and is commonly used for lighter aircraft with lower torque requirements (See the WHLW600XLT or WHLWI600XLT if more torque is required). This I-Series internal caliper design is favored for use in many retractable gear systems for it's low profile compared to external caliper designs when low drag and clean lines are desired with easy removal as withall I Series brakes. The wheel is designed to use 6.00-6 aircraft style tires as well as any oversized tire since tire clearance is not an issue with the internal caliper design. The bearing spacing accomidates the PA-18 style axle or the MATCO mfg WHLA6 axle or WHLAXLE6 axle assembly (includes axle, nut, and washer) can be used.





The WHLWi600SS is designed for the following standards:

Static Capacity 1860 LBS
Load Limit 5580 LBS
Maximum Accelerate/Stop Kinetic Energy 225000 ft-lb
Torque Rating (@450 PSI) 1980 in-lb

Search Filters: Wheel Type: CNT CAST AL, Tire Beadseat Diameter: 6 Inch, Bearing Diameter (C): 1.50, Bearing Type: TAPER/ROLL, Wheel Assembly width (F): 6.15, Static Capacity (LBS): 1860, Load Limit (LBS): 5580, Kinetic capacity (FT LBS): 225000, Caliper Type: INTERNAL

Main | Products | Contact Us | Technical Support | MATCO mfg News  | Terms Of Use