The MATCO mfg WHLB600XLT 6 INCH inch brake assembly is designed for use with MATCO mfg wheels. This model uses an Internal caliper design and is designed to be used with the WHLD5 disc. The WHLB600XLT is supplied with BPA1.50 brake plate adapter.
The M66-105 brake pad is used. This semi-metallic friction material compound was selected for its high friction performance and low fade at elevated temperatures to provide smooth stopping under high load conditions. The reline kit for this brake is the BRL-6 which includes linings and rivets for two calipers.
Most models of MATCO mfg brakes are upgradeable to higher torque configurations as engine size or tire changes. Check our brake conversion kits or call our technical support staff for your specific needs.
The WHLB600XLT is designed for the following specifications:
|Energy Rating (FT-LBS)
|Torque Rating (@450 PSI)
This model is s special version of the WHLB600XT brake assembly but is modified to allow use of the thinner D2 disc where lower energy is required from the brake but high torque is still desired.