MATCO mfg produces a superior 5 inch wheel and brake assembly for use with aircraft requiring less than 1420 lbs per wheel. This model uses inch 1.25 bearings. (Check the product comparison table for other bearing and caliper configurations).
DIMENSIONS - The is a 5 inch wheel with 4.65 inch width with an additional 1.39 inch caliper spacing. Bearing spacing is 2.50 inches and axle spacing is 1.85 inches. The total weight of this wheel and brake assembly is 8.9 pounds. The bearing axle diameter is inches.
WHL & BRK ASSY 5"
PERFORMANCE
The WHLW51SD is designed for the following standards:
Static Capacity |
1420 LBS |
Load Limit |
4260 LBS |
Maximum Accelerate/Stop Kinetic Energy |
283613 ft-lb |
Torque Rating (@450 PSI) |
3976 in-lb |
|