No.


Catalog: Main > Main Wheels & Brake Assemblies > Internal Caliper Diecast
This product also appears in: Main Wheels & Brake Assemblies



Product Options

Price: $358.69



Product Description

MATCO mfg produces a superior 5" inch wheel and brake assembly for use with aircraft requiring less than 660 lbs per wheel. This model uses 0.625 inch BALL bearings. (Check the product comparison table for other bearing and caliper configurations).


The W51CC is a 5" inch wheel with 4.34 inch width with an additional 1.13 inch caliper spacing. Bearing spacing is 3.08 inches and axle spacing is 1 inches. The total weight of this wheel and brake assembly is 4.57 pounds. The bearing axle diameter is 0.625 inches. The WHLW51CC is machined for use with the 5.00-5 tire and tube. See the WHLW50CC for use with 11x4-5 tires and tubes or other industrial 5 inch tires.

WHL & BRK ASSY 5".625



The WHLW51CC is designed for the following standards:

Static Capacity 660 LBS
Load Limit 2000 LBS
Maximum Accelerate/Stop Kinetic Energy 93441 ft-lb
Torque Rating (@450 PSI) 1540 in-lb

Search Filters: Wheel Type: Die Cast AL, Tire Beadseat Diameter: 5 Inch, Caliper Spacing (B): 1.13, Bearing Diameter (C): 0.625, Axle Spacing (D): 1.0, Bearing Spacing (E): 3.08, Bearing Type: SEALED BALL, Wheel Assembly width (F): 4.34, Static Capacity (LBS): 660, Load Limit (LBS): 2000, Kinetic capacity (FT LBS): 93441, Torque Rating (in lb @ 450 PSI): 1540, Caliper Type: INTERNAL, Weight (LBS): 4.57

Main | Products | Contact Us | Technical Support | MATCO mfg News  | Terms Of Use